.
.
.
Home Products Profile Contact Us Whats New
 
Ethernet over TDM (IP over TDM) Converters
 
   
Gigabit Ethernet over SDH / STM-1 converters

AceCom’s Gigabit Ethernet over SDH (STM-1) provides a simple, cost effective and compact solution to convert 10/100/1000Base-T (Gigabit) data interface on the user side and transport Ethernet traffic over a STM-1 (155Mbps) SDH link and reconstruct the data back to Ethernet frame format, at remote end. The converter is an effective method for converting and transporting 10/100/1000Base-T (Gigabit) Ethernet data over an STM-1 (155Mbps) SDH link.

Data Sheet (PDF)

   
Ethernet over SDH / STM-1 converters  

AceCom Ethernet over SDH / STM-1 (EoS) provides a simple, cost effective and compact solution to convert 10/100BaseT data interface on the user side and transport Ethernet traffic over a STM-1 SDH link and reconstruct the data back to Ethernet frame format, at remote end. The converter is an effective method for converting and transporting 10/100BaseT Ethernet data over an STM-1 (SDH) link. Valiant is available in a 1U (44mm high) box in a 19-inch rack mount chassis.

Data Sheet (PDF)

   
Ethernet over DS3 converters  

AceCom offers its Ethernet over DS3 Switch (Ethernet to DS3 Switch) packaged in a 1U, 19-inch rack-mountable chassis. Ethernet over DS3 Switch (Ethernet over DS3 Switch) provides a four 100BaseT Ethernet and 100Base-FX optical (optional) Ethernet interfaces on the user side which may be used to transport Ethernet traffic over a DS3 link. Both Ethernet interfaces may be used simultaneously. The Switch provides a simple and cost effective method to convert and transport Ethernet data over an DS3 link.

Data Sheet (PDF)

   
Ethernet over E3 converters  

AceCom offers its Ethernet to E3 converters (Ethernet over E3 Converters) packaged in a 19-inch rack-mountable chassis. Provides framed and un-framed E3 options. Ethernet to E3 converters (Ethernet over E3 Converters) provides a 100BaseT data interface on the user side which may be used to transport Ethernet traffic over a E3 link. The converter provides a simple and cost effective method to convert and transport 100BaseT Ethernet data over a E3 link.

Data Sheet (PDF)

   
Ethernet over 8/16 E1 - ML-PPP  

VCL-ETH-8E1-ML / VCL-ETH-16E1-ML Converter allows the user to send Ethernet data between two points or between multiple points (maximum 12 directions), over 8/16 E1 Links respectively. E1 Interfaces options are 75 Ohms/120 Ohms (Optional – as per user requirement). This equipment provides two Electrical Gigabit (1000/100/10M) Ethernet Interfaces (RJ-45) ports at the customer site.

Data Sheet (PDF)

   
Ethernet over 1 E1  

AceCom offer its Ethernet over 1 E1 converter. The 10Base-T Ethernet interface to 1 E1 interface converter which offers a channelized E1 and 10Base-T interface conversion. This equipment offers electrical level conversion between 10Base-T Ethernet interface and a G.703 / E1 (or fractional E1) interfaces.

Data Sheet (PDF)

   
4 Ethernet over E1  

The VCL-4 Ethernet over E1 Converter provides the user with an option to transport Ethernet (multiple LANs) over an E1 link. The equipment converts and transports upto 4 x Ethernet links over an E1 in a shared* mode, or a discreet* mode, depending on the users preference and selection.

Data Sheet (PDF)

   
Ethernet over 4 E1  

AceCom offer its Ethernet over 4 E1 converter. The 10Base-T Ethernet interface to 4 E1 interface converter which offers a channelized E1 and 10Base-T interface conversion. This equipment offers electrical level conversion between 10Base-T Ethernet interface and a G.703 / E1 (or fractional E1) interfaces.

Data Sheet (PDF)

   
Ethernet over 8 E1  

AceCom Ethernet over 8E1 Converter allows the user to send Ethernet data, between two points, over E1 links. E1 Interfaces are 120 Ohms (75 Ohms is optional). Ethernet Interface options may be ordered as 10/100 Base-T Electrical Ethernet or 100Base-FX Optical Ethernet over 850nm/1310nm /1550nm single mode optical fiber interfaces. The equipment be always installed and used in pairs, with one terminal being installed at either end of the E1 link.

Data Sheet (PDF)

   
Ethernet over 16 E1  

AceCom Ethernet over 16E1 Converter allows the user to send Ethernet data, between two points, over E1 links. E1 Interfaces are 120 Ohms (75 Ohms is optional). Ethernet Interface options may be ordered as 10/100 Base-T Electrical Ethernet or 100Base-FX Optical Ethernet over 850nm/1310nm/1550nm single mode optical fiber interfaces. The equipment be always installed and used in pairs, with one terminal being installed at either end of the E1 link.

Data Sheet (PDF)

   
SDH / STM-1 Optical to SDH / STM-1 Electrical converters  

AceCom offers STM-1 Optical to STM-1 Electrical converter provides a simple and cost-effective conversion between STM-1 optical interface and STM-1 electrical interface. STM-1 Optical to STM-1 Electrical converter is an interface conversion equipment supplied with one STM-1 electrical (75 Ohms BNC) interface and one STM-1 optical (MSA compliant SFP) interface.

Data Sheet (PDF)

Products Links

Technical specifications are subject to change without notice.
All brand names and trademarks are the property of their respective owners.

.
     
 

© AceCom Networks Pte Ltd. - 2013. All rights reserved